By the wave nature of the main points chord two categories, one is a sine wave inverter, and the other is a square wave inverter. Sine wave inverter output power is the same as Solar power inverters we use every day or even better sine wave AC power because it does not exist in the electromagnetic pollution. The square wave output of the inverter is the poor quality of the square wave alternating current, the positive maximum to the negative maximum value to almost simultaneously generated, so resulting in a dramatic effect on the instability of the inverter and the load itself. At the same time, its load capacity is poor, only 40-60% of the rated load, not with inductive load (explained in detail below article). If the load carried by large, square-wave current third harmonic components contained enable capacitive currents flowing into the load increases, and in severe damage to the load of the power supply filter capacitor. For the above disadvantages, in recent years a quasi-sine wave (or modified sine wave, modified sine wave, sine-wave, etc.) of the inverter, the output waveform from the positive maximum to a negative maximum time between intervals, using the results improved, but is still quasi-sine wave by the broken line, belonging to the scope of the square wave, continuous bad. In conclusion, the sine wave inverter providing high-quality alternating current, can bring any kind of load, but the technical requirements and costs are high. Quasi-sine wave inverter can meet most of our electricity demand, high efficiency, low noise, moderate prices, and thus become the market mainstream products. vehicle power inverters Square wave inverters produced using simple multivibrator, which belongs to the level of technology in the 1950s, will gradually withdraw from the market.
没有评论:
发表评论